Description: There are at least two fundamental design approaches one could use when trying to penetrate the icy shell on Europa and other planetary bodies: a melt probe and an electro-mechanical drill. A melt probe uses a hot point to melt through ice and penetrate downward. In this regard, it is a very simple approach - it requires a heat source. However, the power required to melt 50-110K ice is 10s of kW, of which 90% is lost into the surrounding ice. In addition, melt probes will not penetrate anything else but ice, and if the heat is provided by integrated RTGs, the probe will overheat and melt if the conductive properties of ice change (e.g. if ice becomes porous, it will become a very good insulator). The electro-mechanical approach is an order of magnitude more energy efficient than a melt probe. However, the drill needs to get rid of the cuttings it is generating. The drill can also freeze in-place if it encounters any liquid water. Numerous drills deployed in Antarctica, for example, froze in-place while drilling down the borehole, because ice tuned into liquid water at the cutter-ice interface. We therefore propose a Hybrid approach that takes the best of both worlds and reduces risks posed by each of the options above. SLUSH is a hot-point electro-mechanical drill that cuts through ice using rotary-percussive action, and melts chips with its hot bit to form slush. The slush moves up the hole where it refreezes behind the drill. SLUSH is approximately 14 cm in diameter and 2.5 m long. Because SLUSH uses mechanical action to break ice, it is significantly faster than a melt probe and also significantly more efficient, since slush does not have as much time to loose heat into the surrounding ice. Since SLUSH uses a hammer drill, it can also penetrate material with a significant fraction of insoluble material (e.g. silt). An added benefit of SLUSH is that science instruments can draw liquid directly from the outside for analysis.

Benefits: The primary application of SLUSH is in penetrating to subglacial oceans on Europa and possibly Enceladus. The system could also be deployed on Mars, in either the northern or the southern Polar Regions. Subsystems developed for SLUSH could be used on many other planetary missions. For example power management, motors, and bits, percussive system can be infused into any other surface missions requiring sample acquisition. These missions include Venus in Situ Explorer, Venus Mobile Explorer, Lunar South Pole Aitken Basin Sample Return, and Mars Sample Return and so on.

Main non-NASA applications include penetrating to subglacial lakes in Antarctica as well as penetrating below Greenland ice sheet. Aseptic sampling of subglacial lakes is critical to astrobiology. A drill that can go through DHMR and is fully decoupled from the surface will be ideal for such an application. The SLUSH could also be used to deploy instruments and sensors (e.g. neutrino counters) around Antarctica. Since this would be a robotic system, the "field" season will not long be limited to a few summer months but could continuous through the year.